|
Product Details:
|
| Item: | Mini Linear Actuator | Motor Type: | Permanent Magnet Brushed DC Motor |
|---|---|---|---|
| Input Voltage: | 24V | Rated Load: | 1600N |
| Max Stroke: | 600mm | Feedback Signal: | No |
| Duty Cycle: | 10% | Limit Switches: | Built-in |
| Drive System Type: | Worm | ||
| High Light: | solar tracker linear actuator,linear actuators for solar tracking systems |
||
24V DC Track Linear Actuator Single motor riser chairs 300mm stroke 155mm installation size
Specification of Track Linear Actuator
| Item name | Track Linear Actuator |
| Max. stroke | 600MM |
| Max. Static load | 1600N |
| Max. Dynamic load | 1600N |
| Operation Speed |
16mm/s/1600n 32mm/s/800n |
| Motor | Brushed DC motor |
| Degree of Protection | IP21 |
| Screw Type | Trapezoidal screw |
| Power Input | 24V |
| Self-locking ability | YES |
| Operating temperature | -5℃~65℃ |
| Optional 1 | Installation size |
Pictures of Track Linear Actuator:
Information of Linear Actuator
The more we understand your application, the more suitable our offer would be.
Please fill the table below as much as you could.
Some modification might be needed to the actuator so as to ensure its adaptability
and durability catering for various uses.
We will offer detailed drawing and quotation after your reply.
| Key Spec. | Client's requirements A | |
| stroke | mm | |
| retracted length | mm (or not critical) => from front mounting hole to rear hole | |
| voltage | v dc (12v, 24v) | |
| load capacity | n (remark: 10 newton =1 kg) | |
| Push or Pull | Using pull force or push force? Both? | |
| Constant tension | Would there be constant tension to piston rod? | |
| Constant pressure | Would there be constant pressure to piston rod? | |
| speed | mm/s | |
| working frequency | estimated cycles per day | |
| working environment | application | |
| ℃ max temperature? | ||
| ℃ min temperature? | ||
| dripping water/ spraying water/ immersion/ high humidity | ||
| any corrosive substance? | ||
| impact? bumpy? | ||
| any side force on piston rod? | ||
| synch (two or more actuators working together) ? | ||
| limit switches | limit switches (end stop) | |
| signal feedback | potentiometer/ hall sensor/ no need | |
| Other requirements | please describe | |
| Quantity | pieces | |
| Drawing No. | x | |
| Unit Price | x | |
| Lead Time | x | |
| Shipping cost | x |
More linear actuators for your reference:
Mini Linear Actuator:
Mid Size Linear Actuator:
Heavy Duty Linear Actuator:
High Force Linear Actuator:
PV tracking Linear Actuator
We guarantee that all products (LINEAR ACTUATOR) you receive will be brand new, and have been thoroughly tested for defect and performance before being shipped to you. At our company we put our products to the test, stressing their performance in heat, cold, liquid, and under heavy loads and high duty cycles. The specifications listed on our products aren't just approximations; they're backed up by hours and days of testing. We're so confident in our actuators quality, performance, and endurance, that we proudly offer the industry leading 12 month warranty.
All linear actuators produced and sold by our company are covered by our comprehensive 12 month warranty against defect or flaw. If we sell you a product, and it stops working before 12 month pass, we will replace it free of charge. However, the product has to only have been used within its rated parameters and environment conditions.
Want to know more about LINEAR ACTUATORS?
Please contact us!!!
+86 18762658863
Contact Person: Miss. Lisa Hao
Tel: + 86 18762658863
